OtxHwLayer parameters

From GarantPlus Alvis Wiki
Jump to: navigation, search

The list of E1/T1 Layer1 paramaters

The location of the config file

The /etc/rtpbridge/OtxHwLayer.conf is responsible for the E1/T1 configuration.

The list of supported parameters

 T1E1LiMode              <E1 / T1> / (NONE) 
 ClockSource             <N>          (0)
 Termination             <OTX_T1E1_TERM_120_OHM / OTX_T1E1_TERM_100_OHM / OTX_T1E1_TERM_75_OHM / OTX_T1E1_TERM_HIGHZ / OTX_T1E1_TERM_300_OHM> 
 ReceiveEqualizer        <ON / OFF>  
 AutoCrcBitInversion     <ON / OFF>  
 SetMonitorMode          <ON / OFF>   
 DisableTxPins           <ON / OFF>  
 FrontEndAmplifier       <ON / OFF>  
 T1E1Loop                <OTX_T1E1_LOOPS_OFF / OTX_T1E1_LINE_LOOP / OTX_T1E1_REMOTE_ON_LOOP_JITTER_ATTEN / OTX_T1E1_REMOTE_OFF_LOOP_JITTER_ATTEN / OTX_T1E1_LOCAL_LOOP>          
 E1LineCode              <OTX_E1_LC_AMI / OTX_E1_LC_HDB3>                                    
 E1FrameFormat           <OTX_E1_FF_DOUBLE_FRAME / OTX_E1_FF_CRC4_MULTIFRAME / OTX_E1_FF_CRC4_MULTIFRAME_G706 / OTX_E1_FF_UNFRAMED>                                      
 AisDetection            <OTX_E1_AIS_ETS300233 / OTX_E1_AIS_G775>        
 ExtendedHDB3errorDetect <ON / OFF>   
 AutoRegainMultiframe    <ON / OFF>   
 RemoteAlarmFormat       <OTX_T1_RA_YELLOW_A / OTX_T1_RA_YELLOW_B>  
 T1LineCode              <OTX_T1_LC_AMI / OTX_T1_LC_B8ZS>
 T1FrameFormat           <OTX_T1_FF_F12 / OTX_T1_FF_F4 / OTX_T1_FF_ESF / OTX_T1_FF_F72 / OTX_T1_FF_F12_J1 / OTX_T1_FF_F4_J1 /OTX_T1_FF_ESF_J1 / OTX_T1_FF_F72_J1 / OTX_T1_FF_UNFRAMED>   
 CRC6                    <ON / OFF>  
 LfaSensitivity          <OTX_T1_LFA_2_OUT_OF_4 / OTX_T1_LFA_2_OUT_OF_5 / OTX_T1_LFA_2_OUT_OF_6>   
 SignalingMode           <OTX_T1_SM_CCS / OTX_T1_SM_CAS_CC / OTX_T1_SM_CAS_BR>   
 AutoResync              <ON / OFF>   
 AutoRemoteAlarm         <ON / OFF>   
 LineLength              <N>          (10)
 LosSensitivity          <N>          (21)
 LosRecovery             <N>          (10)
 HighTxPower             <ON / OFF>   (OFF)
 RxThreshold             <N>          (500)
 ConfigDynamicMode       <ON / OFF>   (OFF)